This Playsafe Playgrounds ongoing project for Easebourne Parish Council in Easebourne Park, Nr Midhurst, West Sussex is the creation of a scooter track.

The Project involved the preparation of the area, tarmacing, painting and line marking.

The details are as follows:

Base Works
Mark out the track with the client on day one of works or prior to starting works on site.

Excavate a track way into the existing grass surface, as shown on the plans/graphics provided, totalling 137m². The excavation will be approximately 1300mm width.
Excavated spoil will be used to create small mounds around the new track as shown on the graphics, any excess spoil will remain onsite and be lost elsewhere on site.

Supply and lay approximately 165m² of geotextile membrane to the excavated area, over lapping joints by 300mm.

Supply and install 170 linear metres of 3mm thickness galvanised steel edging to form all curved and straight perimeter edges as shown on the graphics provided.
The overall width of the new track will be 1200mm minimum width.

Supply and lay 137m² of type 1 stone to a minimum compacted depth of 100mm throughout the excavated area. Stone will be used to form the basic shapes of the shallow humps/undulations in the surface as indicated on the graphics provided.

Tarmac Surfacing
Supply, lay and roll 137m² of 20mm dense binder course tarmac at a depth of 40mm over the new base works. (Includes the formation and shaping of shallow road humps as shown on the graphics provided).

Supply, lay and roll 137m² of 6mm dense wearing course tarmac at a depth of 25mm over the binder course tarmac.

Here’s some images of the Easebourne Park Tarmac Scooter Track Project works: